View RR264M-400_4585710.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

RR264M-400
Diodes
Rectifying diode
RR264M- 400
Applications General rectification Dimensions (Unit : mm)
1.60.1 0.10.1 0.05
Land size figure (Unit : mm)
1.2 0.85
2.60.1
3.50.2
Features 1) Small power mold type. (PMDU) 2) High reliability.
PMDU
Construction Silicon diffused junction Structure
0.90.1
ROHM : PMDU JEDEC :SOD-123 Manufacture Date
0.80.1
Taping dimensions (Unit : mm)
4.00.1 2.00.05 1.550.05 1.750.1 0.250.05
3.50.05
8.00.2
1.810.1
4.00.1
1.00.1
3.710.1
1.5MAX
Absolute maximum ratings (Ta=25C)
Parameter Reverse voltage(DC) Forward current(DC) Average rectified forward current(*1) Forward current surge peak 60Hz1cyc Junction temperature Storage temperature Symbol VR IF Io IFSM Tj Tstg (*1)Mounting on epoxy board. 180Half sine wave Limits 400 1 0.7 25 150 -55 to +150 Unit V A A A
Electrical characteristics (Ta=25C)
Param eter Forward voltage Revers e current Sym bol VF IR Min. Typ. Max. 1.1 10 Unit V uA IF =0.7A VR =400V Conditions
Rev.D
3.05
1/3
RR264M-400
Diodes
Electrical characteristic curves (Ta=25C)
REVERSE CURRENT:IR(nA) FORWARD CURRENT:IF(A)
Ta=75 Ta=125 0.1 Ta=150 Ta=25 100000 Ta=150 10000 1000 100 10 1 0.001 0 200 0.1 Ta=125
CAPACITANCE BETWEEN TERMINALS:Ct(pF)
1
100
f=1MHz
Ta=75 Ta=25 Ta=-25
Ta=-25 0.01
10
FORWARD VOLTAGEVF(mV) VF-IF CHARACTERISTICS
400
600
800
1000
1200
0
100
200
300
400
1 0 5
REVERSE VOLTAGEVR(V) VR-IR CHARACTERISTICS
REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS
10
15
20
25
30
970 FORWARD VOLTAGE:VF(mV) Ta=25 IF=0.7A n=30pcs
500 450 REVERSE CURRENT:IR(nA) 400 350 300 250 200 150 100 50 AVE:34.13nA Ta=25 VR=400V n=30pcs
150 140 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 130 120 110 100 90 80 70 60 50 IR DISPERSION MAP Ct DISPERSION MAP AVE:99.5pF Ta=25 f=1MHz VR=0V n=10pcs
960
950
940 AVE:940.7mV
930
920 VF DISPERSION MAP
0
150 RESERVE RECOVERY TIME:trr(ns) PEAK SURGE FORWARD CURRENT:IFSM(A) IfsmIfsm 100 1cyc 1cyc 8.3ms 8.3ms
4910 4900 4890 4880 4870 4860 4850 4840 4830 4820 4810 IFSM DISPERSION MAP trr DISPERSION MAP AVE:4860ns Ta=25 IF=0.1A IR=0.1A Irr=0.1*IR n=10pcs
100 PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm 8.3ms 8.3ms 1cyc 50
50 AVE:44.0A 0
0 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100
100
TRANSIENT THAERMAL IMPEDANCE:Rth (/W) PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm t
1000
Mounted on epoxy board IM=10mA IF=0.5A
1.5
Rth(j-a)
100
1ms
time
DC FORWARD POWER DISSIPATION:Pf(W) 1 Sin(180) 0.5 D=1/2
300us
Rth(j-c) 10
50
1
0 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100
0.1
0.001 0.01
0 TIME:t(s) Rth-t CHARACTERISTICS
0.1 1 10 100 1000
0
0.5 1 AVERAGE RECTIFIED FORWARD CURRENTIo(A) Io-Pf CHARACTERISTICS
1.5
Rev.D
2/3
RR264M-400
Diodes
0.01 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 0.008 REVERSE POWER DISSIPATION:PR (W) 0.006 0.004 DC 0.002 0 0 100 200 300 REVERSE VOLTAGE:VR(V) VR-PR CHARACTERISTICS 400
2 0 0A 0V 0 DC 1 D=1/2
Io Io t T VR D=t/T VR=15V Tj=125 AVERAGE RECTIFIED FORWARD CURRENT:Io(A)
2 0A 0V 1.5 DC 1 D=1/2 Io t T VR D=t/T VR=15V Tj=125
1.5
Sin(180) D=1/2
0.5
Sin(180)
0.5
Sin(180)
0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE:Ta() Derating Curve(Io-Ta)
0 0 25 50 75 100 125 150 CASE TEMPARATURE:Tc() Derating Curve(Io-Tc)
30 ELECTROSTATIC DISCHARGE TEST ESD(KV) 25 AVE:28.4kV 20 15 10 5 0 C=200pF R=0 C=100pF R=1.5k AVE:6.90kV
ESD DISPERSION MAP
Rev.D
3/3
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright (c) 2007 ROHM CO.,LTD.
THE AMERICAS / EUPOPE / ASIA / JAPAN
Contact us : webmaster@ rohm.co. jp
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121 FAX : +81-75-315-0172
Appendix1-Rev2.0

▲Up To Search▲

Price & Availability of RR264M-400

	To Download RR264M-400 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .